Downspouts are vertical pipes that are used to direct rainwater from the roof to the ground. Downspouts are most commonly seen attached to the corners of a home. Without a downspout, water will fall off a roof and can pool around the foundation, leaking through cracks in the walls and windows and causing severe damage to the home. These essential drainage pipes protect a building's foundation by diverting the water away so that flooding and damage does not occur.

Aluminum Downspouts

Copper Downspouts

Galvanized Steel Downspouts

 

Bonderized Steel Downspouts

 

 

Thin Spiral Downspout

 

Wide Spiral Downspout

Round Downspouts

Round Copper Downspouts

 

Smooth Rectangular Downspout

Half Round Elbows

Elbows are the fittings that connect the Half Round Gutter and the round downspout. Two elbows attached to the round outlet are traditionally used to run the underside of the eav in order to mount the downspout to the wall of the structure. Elbows can be attached to the underside of the round downspout in order to disperse the water in the desired direction.

Plain Round Elbows

Round Corrugated Elbows

K Style Elbows

Elbows are fittings that attach to the downspout. One end of the gutter elbow is crimped so that it can fit inside another elbow or downspout. Elbows are used at the bottom of the downspout at ground level to direct drainage in a particular direction

A Elbows

B Elbows

Round Downspouts

Plain Round

Round Corrugated

 

4" Round Copper

Rectangular Downspouts

 

Large Square Smooth

(All Sizes Available)

 

Large Rectangular Smooth

(All Sizes Available)

 

3"x4" Smooth Rectangular

 

2"x3" Smooth Rectangular

3"X4" Corrugated

 

BACK TO PRODUCTS

Serving Los Angeles and Ventura Counties since 1986

FREE ESTIMATES

Toll Free: 800-993-1193 Office: 818-993-0493 Fax: 818-363-2004

P.O. Box 7993, Northridge, CA 91327

Email: prgestimates@aol.com

HOME | PRODUCTS| PHOTOS | CONTACT US | FREE ESTIMATE | TESTIMONIALS | BLOG